Can y'all recommend a suppressor for a PCC/Lever action? I am currently in the Dead Air ecosystem, but have no problem trying something different. Thanks!
4:19p, 4/29/24
In reply to KRamp90
What are your priorities?
Weight?
Sound reduction ?
Accuracy?
USA made?
Repeatability when removing/reinstalling can?
Budget?
Weight?
Sound reduction ?
Accuracy?
USA made?
Repeatability when removing/reinstalling can?
Budget?
4:21p, 4/29/24
If your going lever action caliber will be key, I run SiCo hybrid's on my 44mag and 45-70 lever guns!
4:44p, 4/29/24
In reply to TikkaShooter
Weight? Not a huge concern
Sound reduction ? Prefer to be able to shoot without hearing protection, or minimal.
Accuracy? Repeatable groups
USA made? Preferred
Repeatability when removing/reinstalling can? Yes
Budget? 1k or less
Weight? Not a huge concern
Sound reduction ? Prefer to be able to shoot without hearing protection, or minimal.
Accuracy? Repeatable groups
USA made? Preferred
Repeatability when removing/reinstalling can? Yes
Budget? 1k or less
11:40a, 4/30/24
I too love my Hybrid 46, but if I were looking today and interested in putting it on a PCC. I'd consider the 46M so you can put it in short mode when weight and length are a bigger concern than sound suppression.
12:33p, 4/30/24
In reply to KRamp90
I'd go this direction:
https://www.capitolarmory.com/thunder-beast-ultra-7-gen2-cb-dt-hub.html
IMO, TBAC has a fantastic break to can lock up system with a conical connection inside the suppressor. Incredibly repeatable if you're taking it off/on other rifles. USA made. Not a fly weight, but Ti shell. Pretty close to the budget.
Quote:
Weight? Not a huge concern
Sound reduction ? Prefer to be able to shoot without hearing protection, or minimal.
Accuracy? Repeatable groups
USA made? Preferred
Repeatability when removing/reinstalling can? Yes
Budget? 1k or less
I'd go this direction:
https://www.capitolarmory.com/thunder-beast-ultra-7-gen2-cb-dt-hub.html
IMO, TBAC has a fantastic break to can lock up system with a conical connection inside the suppressor. Incredibly repeatable if you're taking it off/on other rifles. USA made. Not a fly weight, but Ti shell. Pretty close to the budget.
5:34p, 4/30/24
In reply to KRamp90
I have one. Rugged is a good company, Obsidian has a lot of accessory options (I can run mine on left hand threaded H&Ks, tri lug pccs, fixed barrel guns, etc. and its nice to be able to run short/long config.
But its primarily designed as a pistol can. You can find something with more volume/probably quieter if you go with a fatter can intended more for smg/pcc, but its for sure versatile.
KRamp90 said:
Thanks for the replies! What about the Rugged Obsidian?
I have one. Rugged is a good company, Obsidian has a lot of accessory options (I can run mine on left hand threaded H&Ks, tri lug pccs, fixed barrel guns, etc. and its nice to be able to run short/long config.
But its primarily designed as a pistol can. You can find something with more volume/probably quieter if you go with a fatter can intended more for smg/pcc, but its for sure versatile.
6:18p, 4/30/24
Route I went. It's a good one for PCC
I'm even using it for my 8.6 Subs until my 338 can gets out of jail.
I'm even using it for my 8.6 Subs until my 338 can gets out of jail.
10:48a, 5/1/24
In reply to JeremiahJohnson
What did you go with for your .338 can? I'd like one that I can also use on a 12" .308 but Q hasn't responded to me on barrel restrictions for the Porq Chop.
11:22a, 5/1/24
In reply to cledus6150
44 mag...shooting the weakest 44SPL that I can...is super duper quiet out of my Henry with the Hybrid 46.cledus6150 said:
If your going lever action caliber will be key, I run SiCo hybrid's on my 44mag and 45-70 lever guns!
4:15p, 5/1/24
In reply to aggieforester05
Dilligent DTF Lti. Tested well. Light weight and relatively inexpensive
9:16a, 5/3/24
In reply to cledus6150
Yup. A few weeks ago I shot about 150 44spls out of mine at a gong ~440 yards away. Shoot, sip coffee, listen for impact, giggle, rinse/repeat.cledus6150 said:
Here are the 44spc low recoils outta that rifle
12:15p, 5/5/24
Ended up with Rugged Obsidian, and the SiCo 46 Hybrid. Bad news, the wait begins. Good news, that gives me time to find what I want to put them on!
4:07p, 5/13/24
In reply to cledus6150
I love my SiCo Hybrid. I just need to get it out of jail.cledus6150 said:
If your going lever action caliber will be key, I run SiCo hybrid's on my 44mag and 45-70 lever guns!